TOOLS & SUPPLIES
- RED HEART® Super Saver®: 1 skein each of 505 Aruba Sea A, 316 Soft White B, 319 Cherry Red C
- Susan Bates® Crochet Hook: 4 mm [US G-6] Notions Tapestry needle stitch marker any size food container spray starch (optional)
- GAUGE: 8 sts and 7 rows sc = 2” (5 cm). Snowflake Motif Version 1 = 4” (10 cm) in diameter, Snowflake Motif Version 2 = 3½” (9 cm) in diameter. CHECK YOUR GAUGE. Use any size hook to obtain the gauge.
- RED HEART® Super Saver®, Art. E300 available in solid color 7 oz (198 g), 364 yd (333 m);multicolor, heather and print 5 oz (141 g), 244 yd (223 m), flecks 5 oz (141 g), 260 yds (238 m) skeins
Models fit 17½ x 14” (44.5 x 35.6 cm) clear plastic grocery store bakery container. Add or subtract chain stitches and rows as necessary to fit own container.
_x000B_
NOTES
This snowflake inspired gift wrapper is a fast & easy project designed to be used as both a decorative embellishment & a securing strap for food containers as well as jars. Snowflake motifs and strap band widths and color designs can be mixed and matched in a variety of ways. Furthermore, snowflakes can be made easily removable for use as a tree decoration by simply tying the motif onto the band, rather than sewing. Or leave the snowflake motif off entirely.
_x000B_
To get a custom fit, plan your design using the dimension of your container & a gauge swatch. Using a tape measure wrapped all the way around the container or jar to be used record the measurement and subtract 1 - 2” (2.5 x 5.1 cm) to allow for negative ease. This will insure a tight fit. Determine the number of starting chains required based upon your gauge swatch & number of sts per inch compared to the container dimensions.
Straps are worked in rows & overlapped about ½” (12.7 mm) (or more as needed) and seamed together. Band should fit tightly over the container to prevent slipping off and to aid in securing the food container top.
_x000B_
Finished measurements Directions are given for Wrappers to fit a container with a 17½” (44.5 cm) circumference. Wrappers can be adjusted based on size of gift container. Snowflake Motif 1 = 4” (10 cm) in diameter, Snowflake Motif 2 = 3½” (9 cm) in diameter
Snowflake Motif 1 (looped spokes)
With desired color, make an adjustable ring. Round 1: Ch 1, 6 sc in ring; join with a slip st in first sc—6 sc.
Round 2: Ch 1, 2 sc in each st around; join with a slip st in first sc—12 sc. Round 3: Ch 1, sc in first st, 2 sc in next st, ch 2, *sc in next st, 2 sc in next st, ch 2; repeat from * around; join with a slip st in first sc—6 ch-2 spaces. Round 4: Ch 1, sc in first st, skip next st, sc in next st, (sc, ch 2, sc) in next ch-2 space, *skip next st, sc in each of next 2 sts, (sc, ch 2, sc) in next ch-2 space; repeat from * around; join with a slip st in first sc—6 ch-2 spaces. Round 5: Ch 1, sc in first st, sc in each of next 2 sts, (slip st, ch 7, slip st) in next ch-2 space, skip next sc, *sc in each of next 3 sts, (slip st, ch 7, slip st) in next ch-2 space, skip next st, sc in each of next 3 sts; repeat from * around; join with a slip st in first sc—6 ch-7 loops. Round 6: Ch 1, slip st in first st, slip st in each of next 2 sts, ([3 sc, ch 3] 3 times, 3 sc) in next ch-7 space, *slip st in each of next 3 sc, ([3 sc, ch 3] 3 times, 3 sc) in next ch-7 space; repeat from * around; join with a slip st in first sc—18 ch-3 spaces. Fasten off. Weave in ends.
Repeat using colors A, B and C for desired number of snowflake motifs.
Snowflake Motif 2
With desired color, make an adjustable ring. Round 1: Ch 1, 6 sc in ring; join with a slip st in first sc—6 sc.
Round 2: Ch 1, 2 sc in each st around; join with a slip st in first sc—12 sc. Round 3: Ch 1, sc in first st, 2 sc in next st, ch 3, *sc in next st, 2 sc in next st, ch 3; repeat from * around; join with a slip st in first sc—6 ch-3 spaces. Round 4: Ch 1, sc in first st, sc in next st, skip next st, (sc, ch 3, sc) in next ch-3 space, *skip st, sc in each of next 2 sts, (sc, ch 3, sc) in next ch-3 space; repeat from * around; join with a slip st in first sc—6 ch-3 spaces. Round 5: Ch 1, sc in first st, sc in each of next 2 sts, (slip st, [ch 4, hdc in 2nd ch from hook, hdc in each of next 2 ch, slip st in ch-3 space] twice in next ch-3 space, *skip next st, sc in each of next next 3 sts, (slip st, [ch 4, hdc in 2nd ch from hook, hdc in each of next 2 ch, slip st in ch-3 space] twice in next ch-3
space; repeat from * around; join with a slip st in first sc. Fasten off. Weave in ends.
_x000B_
Snowflake Motif Finishing
Wet finished motif, flatten and straighten snowflake spokes, allow to dry. For extra flattening, cover damp motif with waxed paper and place heavy book on top until motif is dry. Optional: Spray with laundry starch to stiffen as desired.
_x000B_
Wrapper Band (wide version) Direction are given for a container with a 17½” (44.5 cm) in circumference. Adjust size to fit own container as indicated in the pattern notes. Specific color patterns of samples are found after pattern directions.
_x000B_
With Row 1 color, ch 62. Row 1: Sc in 2nd ch from hook, sc in each ch across—61 sc. Row 2: Rotate to work across end of Row 1, ch 1, work 3 sc in row-end sc; rotate to work across opposite side of foundation ch, sc in each ch across, turn—64 sc. Row 3: Ch 2 (does not count as a st here and throughout), hdc in first 61 sts, working around the end, 2 sc in each of next 3 sts, hdc in each of last 61 sts, turn—128 sts. Row 4: With designated color, ch 2, hdc in each of first 61 sts, 2 hdc in each of next 2 sts, hdc in each of next 2 sts, 2 hdc in each of next 2 sts, hdc in each of last 61 sts—132 hdc. Fasten off. Row 5: With right side facing, join Row 5 color with a slip st in first st or Row 4, ch 1, sc in each of first 63 sts, [2 sc in next st, sc in next st] 3 times, sc in each of last 63 sts—135 sc. Fasten off. Weave in ends.
_x000B_
Wide Wrapper Band Color Sequences
Wide Version A
Rows 1-3: A.
Row 4: B.
Row 5: C.
_x000B_
Wide Version B
Row 1-4: B.
Row 5: A.
Middle Accent: Two strands of C held together as one.
_x000B_
Wide Version C
Row 1-4: C.
Row 5: A.
Middle Accent: Two strands of B held together as one.
Narrow Wrapper Band
Direction are given for a container with a 17½” (44.5 cm) in circumference. Adjust size to fit own container as indicated in the pattern notes. Specific color patterns of samples are found after pattern directions.
_x000B_
With Row 1 color, ch 66.
Row 1: Sc in 2nd ch from hook, sc in each ch across—65 sc. Row 2: Rotate to work across end of Row 1, ch 1, work 3 sc in row-end sc; rotate to work across opposite side of foundation ch, sc in each ch across, turn—68 sc.
Row 3: With designated color, ch 1, sc in each of first 65 sts, 2 sc in next st, sc in next st, 2 sc in next st, sc in each of last 65 sts, turn— 135 sc. Fasten off. Join Row 4 color. Row 4: With Row 4 color, ch 1, sc in each of first 66 sts, 2 sc in next st, sc in next st, 2 sc in next st, sc in each of last 66 sts. Fasten off. Weave in ends.
_x000B_
Narrow Version A
Row 1-2: B.
Row 3: A.
Row 4: C.
_x000B_
Narrow Version B
Row 1-3: C.
Row 4: B.
_x000B_
Narrow Version C
Row 1-3: A.
Row 4: C.
Middle Accent: Two strands of B held together as one.
Finishing
Middle Accent (optional)
Thread 2 strands of designated yarn onto yarn needle, weave through the holes created by working both sides of the starting ch, in the center of the finished band. Secure the yarn ends neatly on wrong side of band.
Wrap band tightly around gift container and pin ends, overlapping the rounded edge about ½” (1.3 cm) or more as needed. Sew through both layers neatly around the curved end to prevent puckers when band is stretched. Likewise, turn the band inside out and sew the loose opposite end to the underneath side of the band. Weave in ends.
_x000B_
With matching color yarn, sew snowflake over the overlapped portion of the band or thread yarn through the band and the centered snowflake and tie on with a bow for easy removal for use as tree decoration. Alternatively, leave motif off, weave yarn along center and tie in small yarn bow.
_x000B_
ABBREVIATIONS
A, B, C = color A, B, C;
ch = chain;
hdc = half double crochet;
sc = single crochet;
st(s) = stitch (es);
( ) = work directions in parentheses into same st;
[ ] = work directions in brackets the number of times specified;
* = repeat whatever follows the * as indicated.