Cricut Clear Stadium Bag

SUPPLIES & TOOLS:

• 1 yd 54" Vinyl
• 2 pkgs Double-fold bias tape
• 3 yds 1" wide webbing for handles
• Clover mini wonder clips
• Basic sewing supplies

DIRECTIONS:

1. Cut 2 - 17"x 17" for front and back.
2. Cut 1 - 7"x 53" for sides and bottom.
3. Cut 1 - 11"x 10" for pocket.
4. Trim the 11" top part of pocket with bias tape.
5. Cut 2 - webbing strips 48" for handles.
6. Mark the center of the bottom of front of bag.
7. Mark the center of the bottom of pocket.
8. Clip the pocket to bottom of bag.
9. Take one of the handles, clip the short end to bottom of bag over pocket, centered over pocket sides.
10. Starting at bottom, stitch up one side of webbing, stopping 1" from top of bag.
11. Stitch across webbing and down the other side of webbing.
12. Repeat for handle on opposite side of pocket.
13. Sew the 2nd handle to back section of bag, marking and placing it to match front.
14. Clip the side section to front with WST.
15. Start at top, around bottom and up the opposite side.
16. Stitch in place using a 1/4" seam, being careful to keep the handles out of the way.
17. Clip and sew the side to the back section with WST.
18. Starting at top, clip the bias tape to front, over seam.
19. Stitch in place around side, bottom and up the opposite side.
20. Repeat for back section.
21. Starting at back of bag on top, trim with bias tape around top.
22. End by folding under the end of the bias tape and stitch over the beginning binding.
23. Mark the center of each handle and fold in half lengthwise 5" on both sides of mark.
24. Stitch along edge.

JOANN HACKS:

• Use Clover Mini Wonder Clips, since pins should not be used for vinyl
• Create your own custom Cricut design to add to the tote.